DDC Series – 12VDC Centrifugal Pumps
Designed for OEM applications such as Thermal Management,
Laser Cooling and Medical Equipment
The Laing DDC is an electronically commutated spherical motor pump, with an expected service life of 50,000 hours if pumping water or a mixture of water and glycol. *Please contact us regarding any other media requirements. The only moving part in a spherical motor pump is a spherically shaped rotor/impeller unit, which is seated on an ultra-hard, wear-resistant ceramic ball. The conventional shaft, shaft bearings and shaft seals have been eliminated. The spherical motor design permits economical operation with comparatively high output. Supply voltage variation provides a simple means of controlling the speed of the DDC pump over a large output range. All parts in contact with the medium are 100% corrosion resistant. With an optional tachometer output, it is possible to monitor the speed of the pump directly.
![](https://iwakiamerica.com/wp-content/uploads/ddc-series.png)
Max. Capacity: Up to 2.25 GPM
- ECM – Electronically Commutated Motor
- Ultra Efficient
- Low Power Consumption
- Long Life
- Continuous Duty
- Variable Speed
- Small Footprint
- Very Quiet
Motor design: | Electronically commutated spherical motor | |
Rated voltage: | 12 Volt DC | |
Power consumption: | DDC 3.1: max. 12 Watt, DDC 3.15: max. 12 Watt, DDC 3.2: max. 18 Watt, DDC 3.25: max. 20 Watt |
|
Voltage range: | 8 to 13,2 Volt* | |
Acceptable media: | Water, Water-/Glycol Mixtures**Other media on request | |
Max. system pressure: | 21.75 PSI | |
Max. system temperature: | 140° F | |
Wetted parts: | Rotor/impeller material: stainless steelgrade 316Ti | |
PPS-GF40 is the pump housing material and the impeller | ||
EPDM O-ring | ||
Aluminum oxide ceramic ball | ||
Carbon bearing cap | ||
Electrical wire connection: | PA6.6 GF35 |
*Minimum startup Voltage 9 Volt
** Check pump performance for mixtures of 20% or more glycol
Videos